Description
These leaf packs are specifically designed to ensure the load is progressively distributed over the entire surface area. This reduces the high stresses that typically develop at leaf ends. These packs provide increased ride quality and protection over stock leafs, significantly increasing the spring life. The leaf clamps are bolted to allow installation of anti squeak nylon liners and each pack is fully scragged & load tested ensuring the spring takes a permanent *set* which reduces the risk of sagging. Leaf pack will provide approximately 2.25 inch of rear lift. Longer shocks are needed in order to accommodate the lift height/travel of these leaf packs. Depending on shocks, extended brake lines may be needed.
NOTE: Longer shocks, u-bolts, exhaust bracket (FK21) and bushings for the shackle side are usually needed when running this leaf pack. These items are sold separately in the rear hardware section.
Additional fitment info from vendor. (Please verify and see fitment disclaimer below)
- Tacoma 1996-2004
